MikroTik CCR1036-8G-2S+

1U rackmount, 8x Gigabit Ethernet, 2xSFP+ cages, LCD, 36 cores x 1.2GHz CPU, 4GB RAM, 41.5mpps fastpath, Up to 28Gbit/s throughput, RouterOS L6

Our fastest router has now become even better – the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible.

The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports, a serial console cable and a USB port.

The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Also available now, the EM model with 16GB of RAM!

Supports both SFP (1.25G) and SFP+ (10G) modules
 Send purchase questions

Description

Specifications

Details
Product code CCR1036-8G-2S+
Architecture TILE
CPU TLR4-03680
CPU core count 36
CPU nominal frequency 1.2 GHz
Dimensions 355x145x44mm
License level 6
Operating System RouterOS
Size of RAM 4 GB
Storage size 1 GB
Storage type NAND
Tested ambient temperature -20C .. +60C
Suggested price $1095.00

Powering

Details
AC input range 100-240
Max power consumption 78
Max power consumption without attachments 78W

Ethernet

Details
10/100/1000 Ethernet ports 8

Fiber

Details
SFP DDMI Yes
SFP+ ports 2

Peripherals

Details
Memory card type microSD
Memory Cards 1
Serial port RS232
Number of USB ports 1
USB Power Reset Yes
USB slot type microUSB type AB
Max USB current (A) 1

Other

Details
CPU temperature monitor Yes
Current Monitor Yes
PCB temperature monitor Yes
Voltage Monitor Yes

Ethernet test results

CCR1036-8G-2S+ Tile 36 core max possible throughput test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Bridging 25 bridge filter rules 2275.7 27636.1 5179.7 21216.1 5163.5 2643.7
Routing none (fast path) 2275.7 27636.1 6578.9 26947.2 41666.7 21333.4
Routing 25 simple queues 2275.7 27636.1 6553.3 26842.3 7643.1 3913.3
Routing 25 ip filter rules 1825.7 22171.3 3033.9 12426.9 3049.7 1561.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

CCR1036-8G-2S+ CCR1036 series IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 130.5 1461.6 123.4 505.4 115.4 59.1
256 tunnels AES-128-CBC + SHA1 912.9 10224.5 1037.4 4249.2 1053.1 539.2
256 tunnels AES-128-CBC + SHA256 902.7 10110.2 1032.8 4230.3 1025.7 525.2
256 tunnels AES-256-CBC + SHA1 901.0 10091.2 1028.3 4211.9 998.2 511.1
256 tunnels AES-256-CBC + SHA256 892.5 9996.0 982.9 4026.0 970.7 497.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
×