MikroTik OmniTIK 5 PoE

7.5dBi Integrated AP, 5GHz Dual chain, 5xEthernet ports with PoE output

OmniTIK is a weatherproof outdoor AP with dual-polarized omni antennas – the perfect companion for our SXT, or for any other 5GHz 802.11a/n standard device. Weatherproof, durable and ready to use. It has ve 10/100 Ethernet ports, PoE support and a built-in 1000mW 802.11a/n wireless radio. It supports Nv2 TDMA technology with up to 200Mbit aggregate throughput.

LED signal indicators on it’s back are fully customizable, show Ethernet activity or wireless signal – or any other information from RouterOS. The USB port gives the ability to connect a 3G modem or a storage drive.

The OmniTIK UPA also features power output on it’s ethernet ports. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters to worry about.

Box contains OmniTik UPA-5HnD, mounting loops, PoE injector, 24v 2.5A power adapter

– RBOmniTikUPA-5HnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– RBOmniTikUPA-5HnD (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).

Description

Specifications

Details
Product code RBOmniTikUPA-5HnD
Architecture MIPSBE
CPU AR9344
CPU core count 1
CPU nominal frequency 600 MHz
Dimensions 368x125x55mm
License level 5
Operating System RouterOS
Size of RAM 128 MB
Storage size 16 MB
Storage type FLASH
Tested ambient temperature -30 .. +70C
Suggested price $99.00

Powering

Details
PoE in Passive PoE
PoE out Passive PoE
PoE in input Voltage 11-30 V
Number of DC inputs 1 (PoE-IN)
Max out per port output (input > 30 V) 0 mA
Max out per port output (input < 30 V) 1 A
Max total out (A) 2 A
Max power consumption 11
Max power consumption without attachments 11W

Wireless

Details
Wireless 5 GHz number of chains 2
Wireless 5 GHz standards 802.11a/n
Antenna gain dBi for 5 GHz 7.5
Wireless 5 GHz chip model AR9344

Ethernet

Details
10/100 Ethernet ports 5

Peripherals

Details
Number of USB ports 1
USB Power Reset Yes
USB slot type USB type A
Max USB current (A) 1

Other

Details
PCB temperature monitor Yes
Voltage Monitor Yes

Wireless specifications

5 GHz Transmit (dBm) Receive Sensitivity
6MBit/s 30 -96
54MBit/s 27 -78
MCS0 30 -96
MCS7 26 -75

Ethernet test results

RBOmniTikUPA-5HnDr2 AR9344 100M all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 40.0 485.8 116.5 477.2 269.6 138.0
Bridging 25 bridge filter rules 40.0 485.8 86.0 352.3 87.6 44.9
Routing none (fast path) 40.0 485.8 116.5 477.2 226.9 116.2
Routing 25 simple queues 40.0 485.8 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 40.0 485.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
×